How To Connect A Computer:
Click on the Network Icon for your device’s Operating System:
Locate and select the Wi-Fi Network you want to connect to:
When prompted, enter your myMILLIKIN Username and Password, and select the Connect or Continue button(s) as needed.
How To Connect A Mobile Device / Cell Phone:
iPhone, iPad, or iPod Touch Devices:
From your Device’s Home Screen, Navigate to Settings and then Wi-Fi.
Turn on the Wi-Fi Service (if it is not already turned on).
Locate and select the Wi-Fi Network you want to connect to:
When prompted, enter your myMILLIKIN Username and Password, and select the Connect or Continue button(s) as needed.
You may be prompted to view and trust the Wi-Fi Network’s Certificate. Select the “Trust” button to continue connecting to the Wi-Fi Network.
After you connect to the Wi-Fi Network, you should see a blue checkmark next to the network and the connected Wi-Fi icon in the upper-right corner of your display.
Android Devices:
From your Device’s Home Screen, navigate to the Settings Menu and find your device’s Wi-Fi / Networking Settings.
Turn on the Wi-Fi Service (if it is not already turned on).
Your device should automatically search for available nearby Wi-Fi Networks.
Locate and select the Wi-Fi Network you want to connect to:
MU-RESNET: use this Wi-Fi Network if you are a Student
MU-ADMIN: use this Wi-Fi Network if you are a Faculty or Staff Member
On an Android Device, you will typically see a list of connection settings - Make sure to set the settings as the following:
EAP Method: Set this setting to PEAP
Phase 2 Authentication: Set this setting to MSCHAPv2
CA Certificate: Set this setting to Use System Certificates
Online Certificate Status: Set this setting to Do Not Verify
Domain (Required): Enter millikin.edu into this field
Identity: Enter your myMILLIKIN Username
Anonymous Identity: Leave this field empty
Password: Enter your myMILLIKIN Password
Advanced / Additional Settings:
Proxy: This setting should be set to None by default
IP Settings: This setting should be set to DHCP by default
Privacy: This setting should be set to Use Random MAC Address by default
Metered: This setting should be set to Detect Automatically by default
Once you have selected and input the required information as directed above, Select the “Save” button to continue connecting to the Wi-Fi Network.
After you connect to the Wi-Fi Network, you should see the connection status information listed and the connected Wi-Fi icon in the upper-right corner of your display.
How To Connect A Video Game System / IoT Device:
How To Connect A Guest Device: